Receive New Product Updates and Special Offers

Thank You

Your form submission has been sent. Thank you for contacting CYMBET™ Corporation.

Error:

There was a problem submitting your form, please try again later.

Message returned from the server:

Products

Image of Cymbet Solid State Batteries

Cymbet EnerChip™ and Energy Processor Evaluation Kits

For more information concerning Cymbet Evaluation Kits, please contact your local Cymbet Sales Representative.

Image of Cymbet EVAL-05 Evaluation Kit

CBC-EVAL-05B EnerChip CC Evaluation Kit contains everything needed to test: EnerChip 5uAh, 12uAh and 50uAh thin film batteries, EnerChip CC CBC3112 and CBC3150 batteries on a 24-pin DIP board and a CBC3105 on a 16-pin DIP board. EnerChips can be connected in various ways.

Image of Cymbet  EVAL-06 Evaluation Kit

CBC-EVAL-06 EnerChip CC Real Time Clock Power Backup Evaluation Kit Experiment with the world's smallest footprint battery backup for low power RTC. A Micro Crystal 2123 RTC with oscillator can be backed up for 92 hours with the EnerChip CC CBC3112 UPS in a Chip™. USB stick with PC GUI.

Image of Cymbet EVAL-08 Solar Energy Harvesting Kit

CBC-EVAL-08 EnerChip EH Solar Energy Harvesting Evaluation Kit - is discontinued and no longer available - use the CBC-EVAL-09 or CBC-EVAL-10 kits instead.

Image of Cymbet EVAL-09 Universal Energy Harvesting Evaluation Kit

CBC-EVAL-09 EnerChip EP Universal Energy Harvesting Evaluation Kit accepts inputs from solar, piezoelectric, thermoelectric or electromagnetic EH transducers. Features the EnerChip EP CBC915 Energy Processor Chip and EnerChip Solid State Batteries.

Image of Cymbet EVAL-10 EnerChip CC Solar Energy Harvesting Kit

New! CBC-EVAL-10B EnerChip CC Solar Energy Harvesting Evaluation Kit this upgrade of the CBC-EVAL-10 continues to use the EnerChip CC CBC3150 with more efficient input power conversion and output voltage power management. An LED is added to display EH active and battery charge status. This design continues to be one of the lowest cost solution for solar-based sensors.

Image of Cymbet EVAL-10 EnerChip CC Solar Energy Harvesting Kit

CBC-EVAL-10 EnerChip CC Solar Energy Harvesting Evaluation Kit uses the EnerChip CC CBC3150 to provide a simple single chip solution for EH power conversion, energy storage and power management. A low cost solution for solar-based sensors.

Image of Cymbet EVAL-11 EnerChip RF Induction Charging Evaluation Kit

CBC-EVAL-11 EnerChip RF Induction Charging Evaluation Kit utilizes EnerAir™ near field RF coupling techniques between two antennas to charge a CBC3150 energy storage device. Perfect for active RFID medical applications, data loggers and other "reusable" types of sensors.

Image of TI eZ430-RF2500-SEH Demo Kit

TI eZ430-RF2500 - this Texas Instruments MSP430 MCU and CC2500 radio works with Cymbet EVAL-09, EVAL-10 and EVAL-11 kits to create a wireless sensor node demo. Download Firmware modifications for Energy Harvesting functionality using the link below. Also read Cymbet applications note AN-1040.

Image of Cymbet TI LaunchPad and Cymbet EH Kit Demo

Silicon Labs RF-to-USB2 Wireless RD kt with Cymbet EVAL-10 EnerChip CC Solar Energy Harvesting evaluation kit . The SiLabs RF-to-USB2 wireless kit is a great way to experiment with low power wireless networking. Now this kit can be solar powered using the Cymbet EVAL-10 EnerChip CC Solar EH kit. The combination is a simple way to explore using ambient light to power your next product. Purchase both kits at one of Cymbet's Distributors.

Image of Cymbet TI LaunchPad and Cymbet EH Kit Demo

Digi-Key TI CC430 and Cymbet EnerChip Alternate Energy Eval Board. This kit from the Digi-Key Design Services team combines a TI CC430 MCU/Wireless combo device with an EnerChip CC CBC3150 and CBC050 connected to a solar cell. The EnerChips store energy and provide power management for the CC430 and LCD display. The video below shows an interesting remote control rocket launch demonstration using various wireless connections.

Image of TI LaunchPad Cymbet EH Kit Demo

Cymbet EH Eval Kits for TI MSP430 LaunchPad Kit. The EnerChip EP EVAL-09, EnerChip CC Solar EH EVAL-10 and the EnerChip CC RF Induction Charger EVAL-11 can all be used to power the TI LaunchPad kit.

Image of Cymbet MicroChip XLP Solar Energy Harvesting Dev Kit

Microchip XLP 16-Bit Ultra Low Power MCU Solar Energy Harvesting Application Development Kit - this Microchip Kit enables designers to develop complete EH applications using all the supplied hardware and software.

Available exclusively at Digi-Key

Questions on the Kit? Contact our Applications Engineers

MN SEO by First Scribe