EnerChip™ CC CBC3150-D9C
EnerChip CC with Integrated Power Management
The EnerChip CC is the world’s first Intelligent Thin Film Energy Storage Device. It is an integrated solution that provides backup energy storage and power management for systems requiring power bridging and/or secondary power. A single EnerChip CC can charge up to 10 additional EnerChips connected in parallel.
During normal operation, the EnerChip CC charges
itself with a controlled voltage using an internal
charge pump that operates from 2.5V to 5.5V. An
ENABLE pin allows for activation and deactivation
of the charge pump using an external control line
in order to minimize current consumption and take
advantage of the fast recharge time of the EnerChip.
When the primary power supply dips below a userdefined threshold voltage, the EnerChip CC will signal this event and route the EnerChip voltage to VOUT. The EnerChip CC also has energy storage protection circuitry to enable thousands of recharge cycles.
The CBC3150 is a 20-pin, 9 mm x 9 mm Dual Flat Nolead (DFN) package, available in tubes, trays, or tapeand-reel for use with automatic insertion equipment.
EnerChip smart solid state batteries are very cost effective and are priced as low as $0.20 for CBC005 bare die or $0.50 for CBC3105 packaged parts in high volumes. Click here to get a quote and learn more....
Features
- Power Manager with Charge Control
- Integrated 50µAh Thin Film Energy Storage
- Built-in Energy Storage Protection
- Temperature Compensated Charge Control
- Adjustable Switchover Voltage
- Charges Integrated EnerChip Over a Wide Supply Range
- Low Standby Power
- SMT - Lead-Free Reflow Tolerant
- Thousands of Recharge Cycles
- Low Self-Discharge
- Eco-Friendly, RoHS Compliant
Applications
- Standby supply for non-volatile SRAM, real-time
clocks, controllers, supply supervisors, and other
system-critical components. - Wireless sensors and RFID tags and other
powered, low duty cycle applications. - Localized power source to keep microcontrollers
and other devices alert in standby mode. - Power bridging to provide backup power to
system during exchange of main batteries. - Consumer appliances that have real-time clocks; provides switchover power from main supply to backup battery
- Business and industrial systems such as: network routers, point-of-sale terminals, single-board computers, test equipment, multi-function printers, industrial controllers, and utility meters.
- Energy Harvesting by coupling the EnerChip
with energy transducers such as solar panels.
Physical Properties
| Package size: | 9 mm x 9 mm |
| Operating temperature: | -20°C to +70°C |
| Storage temperature: | -40°C to +125°C |
Electrical Properties
| Output voltage: | 3.3V |
| Capacity (typical): | 50µAh |
| Recharge time to 80%: | 20 minutes |
| Charge/Discharge cycles: | >5000 to 10% discharge |