This video taken on the show floor at Embedded World 2014 in Nuremberg Germany demonstrates the new EnerChip RTC product family. We also demonstrate the Cymbet EnerCard solar energy harvester powering the emMicro 9301 Bluetooth Low Energy wireless iBeacon.
This video demonstrates how Cymbet EnerChip rechargeable solid state batteries could power a smart contact lens. This lens concept was put forward by staff at Ghent University in collaboration with IMEC and CMST. More information on non-cytotoxic EnerChip batteries can be found here http://www.cymbet.com/design-center/embedded-energy.php.
While attending the 2013 Wearable Tech Show in New York city, Steve Grady describes how Cymbet EnerChip rechargeable solid state batteries enable various Wearable Technology applications. Of special interest are the Health Monitoring and Medical Implantable devices that use EnerChip batteries.
EnerChip solid state batteries can be used to integrate energy storage directly into devices. EnerChips can be copackaged with other Integrated Circuits using standard bare die wire bond or solder bump attachment techniques.
Cymbet showed new technologies with key Partners at Sensors Expo 2013 including: SolChip, MicroGen, Cardinal Components, Ambiq Micro, NXP and Widetronix . See all the demos in this video from the show floor.
This short video details the unique features and benefits of the Cymbet EnerChip smart solid state rechargeable energy storage device.
Charge EnerChip™ Solid State Batteries using near field RF Induction Charging. The CBC-EVAL-11 Evaluation kit provides everything needed to experiment with RF Induction Charging and creating innovative devices such as rechargeable data loggers.
Cymbet CBC-EVAL-10 EnerChip CC Solar Energy Harvesting Evaluation kit powers the Texas Instruments MSP430 LaunchPad demo kit. A data logging application is available for download on the Datasheets and Downloads page.
This is a video of a Cymbet EnerChip product discussion with Tom Williams Editor-in-Chief of RTC Group at the 2012 Embedded World Show in Nurnburg Germany.
Cymbet EnerChip Energy Harvesting Using Flow. Air flow in an HVAC duct powers a turbine that is connected to an EVAL-10 kit.
Cymbet EnerChip Energy Harvesting Using Thermal gradients. A thermoelectric generator creates energy that is converted and stored by the Cymbet EnerChip smart solid state battery. .
The Cymbet EnerChip CC CBC3112 provides the power back-up for the Micro Crystal 2123 Real Time Clock with integrated oscillator. This combination is the smallest footprint power back-up solution available today.
Applications for Cymbet EnerChip Smart Solid State Batteries are highlighted
The CBC-EVAL-10 EnerChip CC Solar Energy Harvesting Kit is described in detail. The EVAL-10 provides a very cost effective Solar Energy Harvesting solution with built-in smart solid state batteries. The EVAL-10 kit works great with demonstration kits from Microchip, Texas Instrument, Silicon Labs and others.
Detailed overview of the Cymbet CBC-EVAL-09 EnerChip Energy Processor Universal Energy Harvesting evaluation kit. The EVAL-09 is the only commercially available kit that provides inputs for Photovoltaic, Piezoelectric, Thermoelectric, Electromagnetic and RF energy harvesting transducers.
This video demonstrates the safety of the Cymbet EnerChip™ Energy Storage Devices by drilling into a charged EnerChip that it powering an wireless sensor. Although the EnerChip is destroyed, there is never any threat of safety hazard as the EnerChip solid state battery is constructed entirely with non-flammable materials and does not have any "thermal runaway" mechanisms of Li-ion batteries.
It turns out that the solar energy harvesting EVAL-08 kit still works after one of the EnerChips is completely destroyed. This video demonstrates how well the EnerChip performs energy harvesting while being completely safe with simple WEEE standards disposal.
Fully charged EnerChip solid state batteries are exposed to direct flame to show that they are non-flammable and do not smoke even though they are completely destroyed. EnerChips are intrinsically safe and meet the UN air transportation requirements of 49 CFR Subchapter C Subsection 172.102 Special Provision 188.
This video demonstrates in a very noisy way that EnerChips are completely safe. Hundreds of fully charged EnerChips are blended down to dust. Nothing eventful happens of course (which is boring to watch - sorry). The EnerChip residue in the blender was disposed of using the same process as all other integrated circuits.
Micorchip video showing their XLP 16-Bit EH Dev Kit featuring XLP "extreme low power low power technology coupled to the Cymbet CBC-EVAL-10 Solar Energy Harvesting evaluation Kit.
Cymbet presentation of Solid State Energy Storage Devices for Micropower Applications at ACAMP MNT Cleantech Seminar